SD-927PWCQ Seco-Larm "No Touch" Single-Gang Indoor White Request-To-Exit Plate

The ENFORCER Wave-to-Open Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

Specifications

• Operating voltage - 12VDC
• Current draw (max.) - 50mA@12VDC
• Relay type - Form C dry contact, 3A@30VDC
• Response time - 10ms
• LEDS
  • Standby - Red*
  • Triggered - Green*
• Output time - Minimum 0.5 sec or as long as hand is near the sensor
• Sensing range - 2" (5cm)
• Operating temperature - -4°~131° F (-20°~55° C)
• Dimensions - 2 3/4"x 4 1/2"x1 1/8" (70x 115x29 mm)
• Weight - 2.5-oz (70g)

SD-927PWCQ Specifications PDF

SD-927PWCQ Manual