TT560 Nitek Video Link Transmitter Only For Use with TR560 Receiver

Live video transmission for operation over twisted pair or Category 5 cables up to 6,000 feet (1,828 meters).

The TT560 is designed for operation over Category 2, 3, 4 or 5 twisted pair cable and requires a Nitek active receiver unit. The units work equally well over existing communication and computer network spare pairs, or new cable installations. A highly balanced transmitter output design assures that the system will not interfere with other equipment on the network. In addition, the transmitter is virtually impervious to ground loop and has high immunity to noise and interference from other signals. Built-in surge suppression is standard.

A dip switch on the unit provides precise adjustment of gain and frequency compensation, allowing the system to be “finetuned” for any cable.

The TT560 includes the transmitter and a power supply for the receiver. Complete systems including the receiver, transmitter and power supplies are available. For more information refer to the Ordering Information section of this sheet or call Nitek.

Specifications:

• Model Number - TT560
• Size - 1.6"H x 4.3"W x 2.4"D
• Power Requirements - 12-24 VAC or VDC@45mA (wall transformer provided with unit)
• Output - Balanced low voltage current loop
• Input - 1 Vpp composite video Monochrome or Color
• Common Mode Rejection - >70dB (with TR560 receiver)
• Video Format - RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
• Operating Frequency - DC to 10 MHz
• Recommended Transmission Distance - up to 6,000 feet (1,828 meters) for both monochrome and color
• Wire Size - 26 to 12 AWG unshielded twisted pair
• UTP Category - Unshielded Category 2 or better
• Temperature Range - -40 degrees C to +85 degrees C
• Humidity Range - 0 to 98%, non-condensing
• Enclosure Material - Black ABS flame retardant plastic
• Twisted Pair Connection - Screw terminals

TT560 Spec Sheet